User's Manual

Repair
46 313540G
Table 9: Approved Anti-Wear (AW) Hydraulic Oils
Supplier Name
Citgo A/W ISO Grade 46
Amsoil AWI ISO Grade 46 (synthetic*)
BP Oil International
Energol
®
HLP-HM, ISO Grade 46
Carl Bechem GmbH Staroil HVI 46
Castrol Hyspin AWS 46
Chevron
Rykon
®
AW, ISO 46
Exxon Humble Hydraulic H, ISO Grade 46
Mobil Mobil DTE 25, ISO Grade 46
Shell Shell Tellus, ISO Grade 46
Texaco Texaco AW Hydraulic, ISO Grade 46
* Note: Do not mix mineral-based and synthetic hydraulic oils. Completely drain oil from reservoir and pump prior to
converting between oils.
If the approved oils are not available in your area, use an alternative hydraulic oil meeting the following require-
ments:
Oil Type:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Anti-Wear (AW) Hydraulic
ISO Grade:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Viscosity, cSt at 40°C: . . . . . . . . . . . . . . . . . . . . .43.0-47.0
Viscosity, cSt at 100°C: . . . . . . . . . . . . . . . . . . . .6.5-9.0
Viscosity Index: . . . . . . . . . . . . . . . . . . . . . . . . . .95 or higher
Pour Point, ASTM D 97:. . . . . . . . . . . . . . . . . . . .-15°F (-26°C) or lower
Other essential properties: . . . . . . . . . . . . . . . . .Formulated for anti-wear, anti-foaming, oxidation stability,
corrosion protection, and water separation