User's Manual

Installation and Setup

18 313292G

Installation and Setup

NOTE:

See , page 27, to aid in component installation.

Connect Air Lines

Refer to component identification in F

. 1, page 9.

Refer to the pneumatic schematic drawings in the XM

Plural-Component Sprayer repair-parts manual 313289

for guidance.

• Connect air lines (68, 69) between the fluid control

assembly (B) and the control box (C).

• Connect air lines (68, 69) between the air controls

assembly (E) and the control box.

Connect Fluid Hoses

Use the following illustration as a guide to connect the

fluid hoses.

Connect Air Hoses

• Connect air hose (12) between air inlet manifold and

air controls assembly. (Hose called out as 12(C)).

• Connect air hose (12) between air controls assem-

bly and both air motors. (Hose called out has 12(A)

and 12 (B)).

Connect Sensor Cables

Connect pressure and temperature sensor cables (sup-

plied with fluid control assembly (B)) to the fluid control

module.

Recirculation

Hose (gray)

Hose to Pump

Lower (black)

Recirculation

Hose (gray)

12 (A and B)

12(C)

12(B)

12(A)

r_xmaa00_313292_4a

Fluid

Control

Module