User's Manual

Gun Repair

36 313227C

Remove Barrel

1. Prepare gun for repair, page 28.

2. Remove the charging probe (2), see page 9.

3. Remove the air cap, page 30. Remove the gun

shroud (48).

4. Carefully loosen the fluid fitting nut (20). Pull the

tube (19) out of the fitting (23). Make sure both fer-

rules (21, 22) and the nut stay with the tube.

5. Remove the jam nut (28) and actuator arm (29). See

page 34.

6. Loosen the three screws (10, 32). See F

IG. 29.

7. Hold the gun body (15) with one hand and pull the

barrel (9) straight off the body. See F

IG. 29.

NOTICE

To avoid damaging the power supply (12), pull the

gun barrel (9) straight away from the gun body

(15). If necessary, gently move the gun barrel from

side to side to free it from the gun body.

FIG. 29. Barrel Removal

TI13438a

FIG. 30. Disconnect Fluid Tube

TI13437a

28 29 30 19