User's Manual

Warnings
313227C 3
Warnings
Warning Symbol
This symbol alerts you to the possibility of serious injury
or death if you do not follow the instructions.
Notice
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back
to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where
applicable.
WARNING
NOTICE
A NOTICE alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNINGWARNINGWARNING
WARNING
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
• Electrostatic equipment must be used only by trained, qualified personnel who understand the
requirements of this manual.
• Ground equipment, personnel, object being sprayed, and conductive objects in work area. See
Grounding instructions.
• Only use grounded Graco conductive air supply hoses.
• Check gun and hose resistance and electrical grounding daily.
• Use and clean equipment only in well ventilated area.
• Interlock the gun air supply to prevent operation unless ventilating fans are on.
• Use cleaning solvents with the highest possible flash point when flushing or cleaning equipment.
• To comply with EN50050, cleaning solvents must have a flash point at least 5° C above ambient
temperature.
• Always turn the electrostatics off when flushing, cleaning or servicing equipment.
• If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop
cloths (potential static arc).
• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
• Keep work area free of debris, including solvent, rags and gasoline.
• Keep a working fire extinguisher in the work area.
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system can cause electric
shock.
• Turn off air supply before servicing equipment.
• All electrical wiring must be done by a qualified electrician and comply with all local codes and
regulations.
• Do not touch gun electrode when electrostatics are on.
• Do not expose to rain. Store indoors.