User's Manual

Component Identification

312878J 9

Icons

Icon Function Shown on Screen(s)

General Icons

Confirm changes • All

Exit without saving changes • All

• Setup screen #1

• Setup screen #3

• Run screen when Learn Mode is enabled

• Setup screen #1

• Run screen when Learn Mode is enabled

Learn Mode Active Indicator (shown in lower-left

corner)

• Run screen when Learn Mode is enabled

Setup Icons - see Controller Setup section on page 21

Reset Piston Counter to Zero • Setup screen #1

Define Shot Amount • Setup screen #2

Define Sequence Modes • Setup screen #3

Open Gun Dispense Valve • Setup screen #4

Close Gun Dispense Valve • Setup screen #4

Change Password • Setup screen #5

Enable “Tap” mode • Setup screen #6

Enable “Hold” mode • Setup screen #6

Enable “Initiate Shot” button on HMI • Setup screen #7

Disable “Initiate Shot” button on HMI • Setup screen #7

Enable Run Screen Shot Editing • Setup screen #7