Manualshelf

User's Manual

ManualsBrandsGraco ManualsLine Striping EquipmentGraco 312307E - LineLazer IV 3900590020HS AutoLayout and 250SPS
11121314151617181920
312307E 17
ti10411a
121.49
FINISH
START
PARKING MODE
Press REMOTE SWITCH to START and FINISH measuring.
NOTE: Measure start-point and finish-point accuracy is critical.
Press remote switch at start, follow the curbing as a reference to guide striper along path
measuring from start to finish. Press remote switch at finish to stop measuring.
Use up/down arrows to adjust correct number of stalls. New parking stall size will display
under STALL SIZE. Establish first stall if curbing does not allow room for striper (in this
case 15 less 1 = 14 for the calculation).
NOTE: System automatically transfers the calculated STALL SIZE from PARKING CALC
to PARKING MODE screen.
Radius Stall Layout: Parking Calculation
Measure inner perimeter distance
18 feet