User's Manual

Engine

20 312226L

Engine

Removal

1. Relieve pressure, page 7.

2. Remove throttle cable from engine.

3. Do Fan Belt, Removal; page 19.

4. Loosen hand nut (241). Swing bracket (30) out.

5. F

IG. 6. Disconnect red, yellow and white/red leads

from engine.

6. Remove engine and rocker plate (87c) from sprayer.

7. Remove four screws (189), washers (114), washers

(170) and nuts (118) and remove rocker plate,

dampeners (59) and washers (114) from engine.

Installation

1. Install rocker plate (87c), dampeners (59) and

washers (170), washers (114) on engine (185) with

four screws (189), washers (170) and nuts (118);

torque to 20 ft-lb (27.1 N•m).

2. Install engine and rocker plate (87c) on sprayer.

3. Connect white/red, yellow and red leads.

4. Do Fan Belt, Installation; page 19.

5. Swing motor retainer bracket (30) in. Tighten hand

nut (241).

All service to the engine must be performed by an

authorized HONDA dealer.

IG. 6

TI6520b

RED

WHITE/RED

GREY

YELLOW

118

114

241

170

87c

114

189

151