User's Manual

Clutch Housing
312195K 15
Clutch Housing
Removal
1. FIG. 10. Remove four cap screws (186) and lock
washers (188) which hold clutch housing (85) to
engine.
2. Remove screw (177) from under mounting plate (96).
3. Pull off clutch housing (85).
Installation
1. FIG. 10. Push on clutch housing (85).
2. Install four cap screws (186) and lock washers (188)
and secure clutch housing (85) to engine. Torque to
180 in-lb (20.3 N•m).
3. Install capscrew (177) from beneath mounting plate
(96). Torque to 20 ft-lb (27.1 N•m).
F
IG. 10
177
96
188
186
85
88
TI6643