User's Manual

Warnings
311776B 3
Pressurized Equipment Hazard
Fluid from gun, leaks or ruptured components can splash in the eyes or on skin and cause serious injury.
• Follow Pressure Relief Procedure, page 3 when you stop spraying and before cleaning, checking
or servicing.
• Do not point spray gun at anyone; put hand, fingers or rag over nozzle, or stop or deflect leaks with
your hand, body, glove, or rag.
• Wear protective clothing, gloves, and eyewear.
Personal Protective Equipment
You must wear appropriate protective equipment when operating, servicing, or when in the operating
area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic
fumes, burns, and hearing loss. This equipment includes but is not limited to:
• Protective eyewear
• Clothing and respirator as recommended by the fluid and solvent manufacturer
•Gloves
• Hearing Protection
Cleaning Solvent Hazard with Plastic Parts
Use only compatible water-based solvents to clean plastic structural or pressure-containing parts. Many
solvents can degrade plastic parts to the point where they could fail. Such failure could cause serious
injury or property damage. See Technical Data on page of this instruction manual and in all other
equipment manuals. Read fluid and solvent manufacturer’s warnings.
Sprayer Warnings
For sprayer operation and warning information refer to your sprayer or compressor operation manual.
Warnings
Pressure Relief Procedure
To reduce the risk of serious bodily injury,
including electric shock and splashing fluid in
eyes, follow this procedure whenever you stop
spraying:
1. Shut OFF air source.
2. Turn main Pump Power OFF.
3. Disconnect power source from both air and
material product.
4. Turn gun air valve ON.
5. Point gun into waste bucket and open trigger
to relieve pressure.
Grounding
To reduce risk of electrical shock, proper
electrical grounding is essential. See your
sprayer or compressor instruction manual and
consult your local electrical codes for detailed
grounding instructions.