User's Manual

Operation
311200A 7
Operation
Leak Detector Operation
During normal operation, the LED on the leak detector
control box and the sensors will flash once per second.
If an error or a diaphragm rupture occurs, the LED and
sensors will flash three times per second and the alarm
will sound. The relay will trip and change state. To stop
the alarm, press the reset button or remove power for 30
seconds. See F
IG. 7.
Maintenance
Clean Sensors
Clean the sensors whenever the pump is disassembled
for cleaning or inspection.
F
IG. 7
TI6850A
LED
Reset Button