Instruction - Parts Feed and Solvent Flush Kits 310863M EN For use with proportioner systems. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See page 2 for model information, including maximum working pressure.
Pump Kits Contents Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manual Conventions . . . . . . . . . . . . . . . . . . . . . . . . Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation/Maintenance . . . . . . . . . . . . . . . . . . . . . . 2 3 4 6 8 Troubleshooting/Repair . . . . . . . . . . . . . . . . . . . . . . 8 Parts . . . . . . . . . . . . . . . . . . . . . .
Manual Conventions Manual Conventions WARNING Hazard Symbol WARNING: a potentially hazardous situation which, if not avoided, could result in death or serious injury. Warnings in the instructions usually include a symbol indicating the hazard. Read the general Warnings section for additional safety information. CAUTION CAUTION: a potentially hazardous situation which, if not avoided, may result in property damage or destruction of equipment. Note Additional helpful information.
Warnings Warnings The following general warnings are related to the safe setup, use, grounding, maintenance, and repair of this equipment. Additional more specific warnings may be found throughout the text of this manual where applicable. WARNING FIRE AND EXPLOSION HAZARD Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion: • Use equipment only in well ventilated area.
Warnings WARNING TOXIC FLUID OR FUMES HAZARD Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed. • Read MSDS’s to know the specific hazards of the fluids you are using. • Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.
Installation Installation If this equipment is used in a Hydra-Cat™ or Xtreme Mix™ proportioning package, see manual 310794. 1. Install solvent flush kit a. See FIG. 1. Install pump using mounting bracket (202) and hardware supplied. Mount bracket on wall, back of proportioner stand, or cart. 2. Install feed kits a. See FIG. 2. Install feed pump (101) in drum and secure with bung adapter (BA). b. Install air control kit (104). c. Screw swivel union (103) into pump fluid outlet.
Installation 3. 5. Install agitator kit a. See FIG. 3. Install agitator (1) in drum. b. Screw air line fitting (2a) into agitator inlet. Connect air line coupler (2b) into fitting (2a). 2a Grounding WARNING Your system must be grounded. Read warnings, page 4. • Proportioner pump: follow instructions in proportioner operation manual. • Air and fluid hoses: use only electrically conductive hoses. • Air compressor: follow manufacturer’s recommendations.
Operation/Maintenance Operation/Maintenance Troubleshooting/Repair Refer to separate pump and agitator manuals for operation and maintenance instructions. See parts lists beginning on page 9 for manual numbers. Refer to separate pump and agitator manuals for operation and maintenance instructions. See parts lists beginning on page 9 for manual numbers.
Parts Parts Part No. 248824, Agitator Kit with Air Connection Ref. No. 1 2 2a 2b 2c 2d 2e 1//8 npt 2e Part No. 224854 249002 169969 208536 203266 104984 156971 Description AGITATOR, helix; see 308175 KIT, air line, agitator FITTING, air line COUPLER, air line HOSE, coupled, air TEE, pipe, 1/4 npt NIPPLE, short, 1/4 npt Qty. 1 1 2d 1 2c 2b 2a 2 - 11-1/2 npt TI5515 Part No. 248825, Feed Kit, 5:1 Monark 101 Ref. No. 101 102 103 104 Part No. Description Qty.
Parts Part No. 248826, Solvent Flush Kit Ref. No. 201 202 203 204 205 206 207 208 209 Part No. Description Qty. 223596 PUMP, Monark, 23:1 (chrome); see 1 307619 15E737 SUPPORT, clamp, solvent pump 1 164259 ELBOW, street 1 169969 FITTING, air line 1 206264 VALVE, needle 1 156589 FITTING, union, adapter, 90° 1 244354 HOSE, suction, (5-gallon pail) 1 187651 STRAINER, 3/4-16 unf 1 157350 ADAPTER, 3/8 npt x 1/4 npt 1 Ref. No. 210 211 213 214 215 216 217 218 219 220 221 222 223 Part No.
Parts Part No. 248885, Solvent Pump, 5 Gallon Pail-Mount Ref. No. 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 Part No. Description Qty.
Parts Part No. 248951, Solvent Flush Kit, Merkur Ref. No. 401 402 403 404 405 406 407 408 409 410 Part No. 233900 15E737 100450 100023 100896 244354 156589 187651 150287 104984 Description SPRAYER, Merkur; see 309463 SUPPORT, clamp, solvent pump SCREW, cap, hex head WASHER, flat FITTING, bushing, pipe HOSE, suction, (5-gallon pail) FITTING, union, adapter, 90° STRAINER, 3/4-16 unf COUPLING TEE, pipe Qty. 1 1 4 4 1 1 1 1 1 1 Ref. No. 411 412 413 414 415 416 417 418 419 420 421 422 423 Part No.
Parts Part No. 258980, Solvent Flush Kit, 45:1 Merkur Ref. No. 501 501a 501b 501c 501d 501e 501f Part No. 262287 LW050A M12LN0 15T795 111799 116395 256421 Description Qty.
Parts Part No. 262393, Solvent Flush Kit, 45:1 Merkur Ref. No. 601 601a 601b 601c 601d 601e 601f 601g 601h 601j 601k 602 603 604 605 606 607 608 610 611 614 Part No. Description Qty.
Parts 310863M 15
Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
