User's Manual

310566 9

Setup

Grounding

WARNING

FIRE AND EXPLOSION HAZARD

Before operating the circulation pack-

age, ground the system as explained

below. Also read the section FIRE AND

EXPLOSION HAZARD on page 4.

1. Pump: use the ground wire and clamp (A, sup-

plied). See Fig. 3. Connect the ground clamp to a

true earth ground.

Fig. 3

2. Air and fluid hoses: use only electrically conductive

hoses.

3. Air compressor: follow manufacturer’s recommen-

dations.

4. Spray gun: ground through connection to a prop-

erly grounded fluid hose and pump.

5. Fluid supply container: follow your local code.

6. Object being sprayed: follow your local code.

7. Solvent pails used when flushing: follow your local

code. Use only metal pails, which are conductive,

placed on a grounded surface. Do not place the

pail on a nonconductive surface, such as paper or

cardboard, which interrupts the grounding continu-

ity.

8. To maintain grounding continuity when flushing or

relieving pressure, hold a metal part of the spray

gun firmly to the side of a grounded metal pail,

then trigger the gun.