User's Manual

309495 7
Service
NOTES:
Torque to 6–10 in-lb (0.68–1.13 NSm)
Torque to 26–32 ft-lb (35.3–43.4 NSm)
Apply lithium base grease to threads
Apply lithium base grease
Torque to 100–125 in-lb (11.3–14.1 NSm)
Apply high strength anaerobic sealant (red)
A
C
E
F
H
24
21
4
28
27
3
1
20
E
N
C
E
H
F
Fig. 4
F
A
17
42
5
A
ti13868a
F
35
N
Gun Disassembly and Assembly
Disassembly
1.
Relieve pressure; page 3.
2. Follow steps 1 to 7 under Valve Stem and Seal
Service.
3. Fig. 6. Remove two retaining rings (8), rod (13)
and trigger (29).
4. Unscrew setscrew (42), then unscrew fluid tube
assembly (19) from gun body (17).
CAUTION
To avoid loosening connections and damaging gun,
grip gun body (17), not handle (14), when removing
fluid tube assembly (19).
5. Remove gun handle screws (9), gun handle (14),
trigger lock (15), ball (2) and spring (7).
6. Remove seal retainer (27), seal (3) and o-rings (5
and 6).