User's Manual

8 308-807
Technical Data
Category Data
Maximum working pressure 3400 psi (23.4 MPa, 234 bar)
Maximum temperature 120_ F (49_ C)
Flow rate at 2000 psi (14 MPa, 138 bar)* Model 240–199: 158 oz/min (4.5 kg/min)
Model 240–200: 154 oz/min (4.4 kg/min)
Outlet port size 1/4 npt(f) and flange
Inlet port size 1/4 npt(f)
Dry weight Model 240–199: 11.6 oz (325 gm)
Model 240–200: 11.6 oz (325 gm)
Length 5.9 in (15.0 cm)
Width 2.6 in (6.6 cm)
Thickness 0.85 in (2.16 cm)
Pressure vessel material Aluminum
Pressure vessel ID 0.25 in (6.4 mm)
Gun seat diameter Model 240–199: 0.125 in (3.2 mm)
Model 240–200: 0.203 in (5.2 mm)
Needle seat type Model 240–199: Carbide ball
Model 240–200: 7_ Tapered carbide
Inlet/outlet angle 20_
Trigger force – breakaway @ 1000 psi
(7 MPa, 69 bar)
Model 240–199: 1.6 lb (0.73 kg)
Model 240–200: 3.8 lb (1.72 kg)
Trigger force – breakaway @ 2000 psi
(14 MPa, 138 bar)
Model 240–199: 2.2 lb (1.0 kg)
Model 240–200: 7.3 lb (3.31 kg)
Trigger force – sustaining Model 240–199: 3.2 lb (1.45 kg)
Model 240–200: 2.8 lb (1.27 kg)
Wetted parts Aluminum, stainless steel, carbide, polyethylene, CV75r
CV75r is a registered trademark of the International Seal Co., Inc.
* Flow rates were measured using PVC sealer dispensed through a 1/8 in. diameter orifice nozzle and z-swivel con-
nected to inlet. Actual flow rates will vary depending on material type, fluid pressure, nozzle size, and system con-
figuration.