User's Manual

3308656
WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames, or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
D Ground all equipment and the equipment being dispensed to. Refer to Grounding on page 4.
D If you are dispensing non-conductive flammable fluids, you must use the unit with the acetal pump,
which is conductive.
D If there is any static sparking or you feel an electric shock while using this equipment, stop
dispensing immediately. Do not use the equipment until you identify and correct the problem.
D Do not use kerosene or other flammable solvents or combustible gases to flush the agitator motor.
For information about flushing the pump, see the Technical Data section of the pump manual.
D Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being dispensed.
D Keep the dispensing area free of debris, including solvent, rags, and gasoline.
D Do not smoke in the dispensing area.
D Extinguish all open flames and pilot lights in the dispensing area.
D The fluid hose you attach to this system must be electrically conductive and must meet the fluid
pressure requirements of the system.
MOVING PARTS HAZARD
Moving parts, such as the rotating blades of the agitator, can pinch or amputate your fingers or other
body parts and can cause splashing in the eyes or on the skin.
D Keep clear of all moving parts when starting or operating the agitator.
D Always shut off the agitator and disconnect the air line before you remove the agitator from the
drum or check or repair any part of the agitator.
TOXIC FLUID HAZARD
Hazardous fluids or toxic fumes can cause serious injury or death if splashed in the eyes or on the
skin, swallowed, or inhaled. When flushing the air motor or pump, keep your face away from the
exhaust port.