User's Manual

Service

4 308169P

Service

1. Disassemble the component. Refer to the illustra-

tions on pages 4 and 5.

2. Use household soap and water or denatured alco-

hol for cleaning. Wipe the parts clean with a clean,

soft, dry rag. Use compressed air to blow dirt and

contaminants out of the lubricator or filter body.

3. Inspect all parts for wear or damage. Replace dam-

aged parts. Use all parts supplied with the kit.

NOTE: The chart identifies the available repair kits for

the air filters and lubricators covered in this manual. The

cutaway drawings shown on pages 5 and 6 show the

contents of the kits.

Repair Kits

Lubricator Repair Kits

Relieve air and fluid pressure before servicing the regu-

lator, filter, or lubricator.

To reduce the risk of serious bodily injury, fluid injec-

tion, splashing in the eyes or skin, injury from moving

parts, ALWAYS open the bleed-type master air pres-

sure and trigger the gun or dispense valve and open

any fluid drain valves to relieve fluid pressure.

For Lubricator Kit No. Description

214848 (Series A) 102774 Repair Kit

214849 102774 Repair Kit

Lubricator 214849, 237212

ADJUSTABLE CAP

VALVE NEEDLE ASSY.

VALVE SEAT

FILLER PLUG

KIT 102774

BOWL

(see chart)

For Lubricator Kit No. Description

214847 24U962 Fill Cap Kit

24U963 Lubricator Service Kit

21848, Series B 17B710 Lubricator Service Kit

17B709 Lubricator Knob Kit

Lubricator 214847, 214848 Series B