User's Manual

Technical Specifications and Ordering Information
Piston Pumps President 20:1
Lower size 450
Maximum fluid pressure 2000 psi (140 bar. 14 MPa)
Maximum motor inlet pressure 100 psi ( 7 bar, 0.7 MPa)
Flow rate @ 60 cpm 1.2 gpm (4.5 lpm)
Cfm or gpm required per gallon 35 cfm
Fluid pump outlet size 3/4” npt (f)
Motor inlet size 1/2” npt (f)
Weight of pump 50 lb (22.7 kg)
Instruction manual 308017
Bin Supply President 20:1
Pump 246933
Air controls: FRL, 3/8”(f) 110150
Floor stand (3” inlet) 222780
Air run away control, 3/4”(f) 224040
Air speed control 1/2”(f) 510441
55-Gallon Drum Supply President 20:1
Ram package with pump
and air regulator
234369
Air run away control, 3/4”(f) 224040
Air speed control, 1/2”(f) 510441
55-Gallon Pail Supply President 20:1
Cart package with pump 234370
Air run away control, 3/4”(f) 224040
Air speed control, 1/2”(f) 510441
Misc. Information President 20:1
Pump lower section 246932
Ram plate replacement seals 165601
20:1 President 20:1 President
on 5 gallon cart
10
Floor Mount
12:1 Bulldog with
2100 pump
BINS
Ram Mount
31:1 Bulldog with
800 pump
DRUMS
Cart Mount
10:1 President with
450 pump
PAILS
Available with hydraulic or pneumatic motors!