Ink Manufacturing and Printing Solutions Solutions for pail, drum, or bulk tank ink applications
Leading The Way In Quality Ink Applications The industry’s most reliable pumps! Graco is proud to offer the ink industry a complete line of Priming Piston and Diaphragm pumps. They offer a proven reliable design used by ink manufacturers and printers worldwide. Whether you are pumping high or low viscosity fluids from mixing tanks, bins, drums or pails, Graco has the perfect pumping solution! Features • • • • P riming piston pumps have flow rates up to 7.5 gpm (28.
Pumps That Last! A complete line of pumps and power sources Whether you’re specialty is ink manufacturing, printing, or both, it’s tough to beat Husky Air-Operated Double Diaphragm Pumps • Ideal for flexographic and gravure ink • igh volume transfer, supply of mixing H ingredients and ink packaging • Unloading dispersion mixers, supplying milling equipment and batch metering of ingredients inks, that are built for years • No exposed seal to wear or leak of reliable service.
Diaphragm Pumps For Ink Supply And Transfer Supply or transfer with ease! Husky Air-Operated Double Diaphragm pumps are ideal for bulk transfer of your solvent or water-based, low to medium viscosity inks and ingredients. They offer easy maintenance with an extremely reliable patented air valve for true non-sticking operation. Features • • • • Diaphragm Pump Designation Part numbers are located on ID tag on center section of all Husky diaphragm pumps.
we’ve got the solution! 307 Selection Guide supply and transfer fluids in both ink printing and manufacturing.
Piston Pumps For Letterpress & Lithographic Inks Pumping your highest volumes and viscosities! With higher pump pressures and flow rates, Graco priming piston pumps handle a broad range of inks with ease. They offer durability, power and reliability in any ink manufacturing or printing application.
Selection Guide Choose the right pump for your application Whether you are supplying ink ingredients to a dispersion mixer or finished inks to your printing press, Graco has a pumping solution! Choose from our complete selection of pumps and packages for transferring from pails, drums and bins. Pails Up to 1 gpm (3.7 lpm) 9.6 lb/min* (4.3 kg/min) • 10:1 President drums Up to 1 gpm (3.7 lpm) 9.6 lb/min* (4.3 kg/min Up to 2.8 gpm (10.5 lpm) 27.5 lb/min* (12.4 kg/min) Up to 7.5 gpm (28.
Technical Specifications and Ordering Information Name of Pump Senator 19:1 Viscount II 1900 Bulldog 31:1 Viscount II 3100 Lower size Maximum fluid pressure Maximum motor inlet pressure Flow rate @ 60 cpm Cfm or gpm required per gallon Fluid pump outlet size Motor inlet size Weight of pump Instruction manual 800 1900 psi (131 bar, 13.1 MPa) 100 psi (air) (6.9 bar, 0.69 MPa) 2.8 gpm (10.6 lpm) 24 cfm 1” npt (f) 3/4” npt (f) 160 lb (73 kg) 308351 800 1900 psi (131 bar, 13.
Name of Pump Bulldog 12:1 Viscount II 1200 King 24:1 Viscount II 2400 Lower size Maximum fluid pressure Maximum motor inlet pressure Flow rate @ 60 cpm Cfm or gpm required per gallon Fluid pump outlet size Motor inlet size Weight of pump Instruction manual 2100 1200 psi (82.8 bar, 8.28 MPa) 100 psi (air) (6.9 bar, 0.69 MPa) 7.5 gpm (28.4 lpm) 20 cfm 1-1/2” npt (m) 3/4” npt (f) 142 lb (65 kg) 308149 2100 1200 psi (82.8 bar, 8.28 MPa) 750 psi (oil) (51.7 bar, 5.1 Mpa) 7.5 gpm (28.4 lpm) 1.
Technical Specifications and Ordering Information Bin Supply President 20:1 Pump Air controls: FRL, 3/8”(f) Floor stand (3” inlet) Air run away control, 3/4”(f) Air speed control 1/2”(f) 246933 110150 222780 224040 510441 55-Gallon Drum Supply President 20:1 Ram package with pump and air regulator Air run away control, 3/4”(f) Air speed control, 1/2”(f) 234369 224040 510441 55-Gallon Pail Supply President 20:1 Cart package with pump Air run away control, 3/4”(f) Air speed control, 1/2”(f) 234370
Cost Savings That Are Hard To Beat Choose hydraulic and save! Unlike pneumatic, hydraulic motors continually reuse the oil required to cycle the motor, making hydraulic technology the most efficient solution for pumping ink! A. Hydraulic power pack – Consists mainly of oil reservoir, electric motor and variable volume/pressure-compensated hydraulic pump. B. Supply and return lines – Supplies high pressure oil to the hydraulic ink pump and returns the used oil. C.
ABOUT GRACO Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service.