User's Manual

No matter what the application, Graco has a bulk hot melt solution
PUMP CONTAINER MAXIMUM MAXIMUM
MODEL STYLE SIZE MELT RATE FLOW RATE VISCOSITY
Therm-O-Flow 20 2-ball (15:1) 5 gal (20 l)
1.3 lb/min* 9 lb/min*
Low to medium
(0.6 kg/min) (4 kg/min)
Therm-O-Flow 20
Check-Mate
5 gal (20 l)
1.5 lb/min* 12 lb/min*
Low to ultra high
Priming Piston (0.7 kg/min) (5.4 kg/min)
Therm-O-Flow 200 Check-Mate
55 gal (200 l)
11 lb/min* 12 lb/min*
Low to ultra high
w/Mega-Flo plate** Priming Piston (5 kg/min) (5.4 kg/min)
* Will vary depending on type of material, results based on typical PSA ** Other plates also available.
Better performance, higher melt rates
Therm-O-Flow 200
• The ultimate hot melt bulk system
• Highest throughput in the industry
†
• Provides accurate temperature control of four,
eight or 12 customer defined heat zones
• Main unit easily integrates with a second
Therm-O-Flow 200 or Therm-O-Flow 20 for
tandem operation (up to 24 customer defined
heat zones)
• Combine multiple Therm-O-Flow 200 units in
parallel for even higher flow rates
Therm-O-Flow 20
• Perfect for 5 gallon (20 liter) applications
in both low and high flow settings
• Provides accurate temperature control of four,
eight or 12 customer defined heat zones
• Main unit easily integrates with a second
Therm-O-Flow 200 or Therm-O-Flow 20 for
tandem operation (up to 24 customer defined
heat zones)
• Compact footprint lets you place unit near
application [ 3x3 ft (1x1m) approx.]
5
Advanced air motor technology, a powerful piston pump and patented platen design
results in throughput capability up to 200% greater than the competition.
†
Tested and compared to the leading competitor, using PSA and butyl
A Complete Line of Therm-O-Flow Systems