Full Product Manual
Table Of Contents
- Models
- Important User Information
- Contents
- Safety Symbols
- General Warnings
- Know Your Sprayer
- Know Your Controls
- Driver Installation
- Setup
- Startup
- Spraying
- Cleanup
- Storage
- Recycling and Disposal
- Troubleshooting
- Replacement Parts
- Technical Specifications
- California Proposition 65
- Notes
- Graco Standard Warranty
- Graco Information
Spraying
3A9402A 19
Reversible Spray Tips
Four spray tips are available for use with this
sprayer. See material container for spray tip
recommendations.
Blue Spray Tips are for spraying paint
.
• Blue Spray Tips are available in ‘PAINT
WIDE’ and ‘PAINT NARROW’
• Blue Spray Tips may be used to spray
materials that are recommended for a
maximum tip size of 0.015”.
Green Spray Tips are for spraying stain
.
• Green Spray Tips are available in ‘STAIN
WIDE’ and ‘STAIN NARROW’
• Green Spray Tips may be used to spray
materials that are recommended for a
maximum tip size of 0.013”.
Not all available tips are included with
sprayer. See retailer if alternate tips are
needed.
Spray Tip Removal
1. Turn Prime Knob down to PRIME
position to relieve system pressure.
2. Rotate Spray Tip 90 degrees.
3. Pull the Spray Tip straight out of the
Spray Tip Guard.
To avoid serious injury from skin injection,
do not put your hand in front of the Spray
Tip when installing or removing the Spray
Tip and Tip Guard.
Locking Tab Slot
Locking
Tab
Remove
Spray Tip
Rotate
Spray Tip 90°