Full Product Manual
Table Of Contents
- Models
- Important User Information
- Contents
- Safety Symbols
- General Warnings
- Know Your Sprayer
- Know Your Controls
- Driver Installation
- Setup
- Startup
- Spraying
- Cleanup
- Storage
- Recycling and Disposal
- Troubleshooting
- Replacement Parts
- Technical Specifications
- California Proposition 65
- Notes
- Graco Standard Warranty
- Graco Information
Spraying
3A9402A 17
Spraying
1. Pointing the Spray Tip at a piece of
scrap cardboard, pull the Trigger to test
the spray pattern.
2. If your Driver has speed settings,
experiment with available settings to
find your preferred spray pattern.
3. Adjust the sprayer’s distance from the
surface and your hand speed to achieve
the desired surface coverage.
NOTE: For best results, fully pull Trigger on
each trigger pull.
Spray Tip Orientation
Adjust the Spray Tip Guard for the desired
vertical or horizontal spraying direction.
Use only water-based materials to
prevent serious injury from fire and
explosion.
To avoid serious injury from skin injection,
do not put your hand in front of the Spray
Tip or Tip Guard.
NO YES
Horizontal
Vertical
Spray Tip
Orientation