Full Product Manual
Table Of Contents
- Models
- Important User Information
- Contents
- Safety Symbols
- General Warnings
- Know Your Sprayer
- Know Your Controls
- Driver Installation
- Setup
- Startup
- Spraying
- Cleanup
- Storage
- Recycling and Disposal
- Troubleshooting
- Replacement Parts
- Technical Specifications
- California Proposition 65
- Notes
- Graco Standard Warranty
- Graco Information
Driver Installation
10 3A9402A
Driver Installation
Driver Selection
Your sprayer is compatible with cordless Drill
Drivers and Impact Drivers.
• Drill Drivers are best for slower
applications with more control. Always
run Drill Drivers in the ‘drill’ setting.
• Impact Drivers are best for higher
productivity applications and can be run
at whatever speed setting gives desired
spray results.
Standard Orientation
1. Connect chuck of Driver to Drive-Shaft
of sprayer.
2. Place Driver onto Driver Support Foot.
You may need to extend Driver Support
Arm to fit your Driver.
3. Secure Driver to Driver Support Foot
with Driver Strap.
Gravity Feed Orientation
1. Flip Driver Support Arm 180°.