Full Product Manual
Table Of Contents
- Know Your Sprayer
- Know Your Controls
- Setup
- Startup
- Spraying
- Cleanup
- Storage
- Recycling and Disposal
- Troubleshooting
- Replacement Parts
- Replacement Parts
- Technical Specifications
- California Proposition 65
- Graco Standard Warranty
- Graco Information
- Before You Spray
- Review Warnings for Important Safety Information
- Models
- Online Resources
- Important User Information
- Contents
- Warnings
Troubleshooting
3A9014C 29
Spray pattern “spits” at the end or
beginning:
Excess material has
accumulated on Spray Tip
and Spray Tip Guard, or
Spray Tip is partially
plugged
Clean Spray Tip and Spray Tip
Guard. Clear Spray Tip. See
Clear Tip Clogs, page 19.
Spray Tip is not fully
inserted into Spray Tip
Guard
See Spray Tip Installation,
page 18.
Spray Tip is worn or
damaged
Replace Spray Tip.
Pump has reached its
maximum life
Replace pump.
Problem Cause Solution
ti15525a
ti15525a