Full Product Manual

Cleaning
3A8110D 21
Cleaning
NOTE: Attach optional cleaning kit (P/N
18D167) and flush pump with water or
compatible cleaning agent to remove any
material or residue prior to removing any
parts.
1. Remove Power Head, see Power Head
Removal, page 25.
Pump Disassembly
2. Remove filter by pinching tabs on filter
and pulling. Rotate inlet housing and pull
to remove housing. Clean inlet assembly
in a bucket of water.
NOTE: If inlet housing is stuck, use a
screwdriver or rod for leverage to assist in
unscrewing the housing.
3. Lower the bucket stabilizer bracket.