Full Product Manual

Setup
3A8110D 11
4. Attach Power Head by inserting pins into
the holes on the pump. Power Head
should automatically align with piston
head once step 3 is complete.
NOTE: Ensure piston is properly inserted into
the Power Head prior to operation. Should
piston not align into the Power Head,
manually pull the piston up and re-align.
5. Close ProConnect cover and tighten
thumb screw to secure Power Head.
Ensure locking screw is installed before
operation.
Standard Series Outlet
Assembly
1. Assemble standard outlet to pump and
using a 1/2 in. or 13 mm wrench, tighten
flange head bolts.
2. Assemble ring to standard series outlet
tab.