Full Product Manual
Table Of Contents
- Before You Spray
- Contents
- Important Grounding Information
- Warnings
- Know Your Sprayer
- Know Your Controls
- Grounding Instructions
- Setup
- Start Up
- Spraying
- Cleanup
- Storage
- Reference
- Maintenance
- Troubleshooting
- ProX19 Cordless Cart Sprayer Parts
- ProXChange Pump Parts
- Wiring Diagram - 60VDC
- Technical Specifications
- California Proposition 65
- Graco Standard Warranty
- Graco Information
Troubleshooting
42 3A9019C EN
Online Resources
ON/OFF switch does not illuminate
when pressed.
Indicates battery is not installed, has
insufficient charge, or is damaged.
Install battery correctly, ensure
battery is fully charged, or replace
battery.
Control board is damaged. Replace control board.
Power switch is damaged. Replace power switch.
ON/OFF switch is constantly illumi-
nated (does not turn off).
Control board is damaged. Replace control board.
Problem Cause Solution
Visit Our Website: magnum.graco.com
Operational Videos: magnum.graco.com/magop/
Manuals: magnum.graco.com/support/#manuals
Parts Online: magnum.graco.com/partsonline/