Full Product Manual

Preparation
10 3A5725C
Preparation
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
1. Turn air compressor ON/OFF switch to
the OFF position.
2. Unplug power cord.
3. Disconnect spray gun from air hose.
4. Open pressure relief valve on gun by
pressing button (pressurized gun only).
Aim gun into waste bucket and trigger
the gun until all air and material pressure
is relieved.
The hopper is pressurized. To reduce the
risk of splashing from pressurized fluid,
always follow the Pressure Relief
Procedure before removing the hopper
from the gun.
NOTICE
Do not relieve pressure by lifting the hopper
clamps. Lifting the clamps while the hopper
is pressurized may damage the hopper
and/or hopper lid.