Technical Specifications

Repair

332119E 19

Repair

Tip Removal/Cleaning

1. Perform Pressure Relief Procedure, page 10.

2. Rotate spray tip (X) 1/4 turn and remove.

3. Wash tip in sink under running water. Use a brush

or pick to remove excess or dried material.

4. Use a pressurized air hose to blow out any remain-

ing material from tip. NOTE: You should be able to

clearly see through the tip hole when cleaned.

5. Install spray tip (X) and position to spray as shown

below.

CleanShot

™

Cleaning (If

applicable)

1. Perform Pressure Relief Procedure, page 10.

2. Remove spray tip/guard assembly (G).

3. Remove CleanShot assembly (Y).

4. Use two wrenches to remove needle seat.

ti20183a

ti21497a

ti21361a

ti21360a

ti21382a

ti21383a

ti21384a