Technical Specifications

Shutdown and Cleaning

332119E 17

Unclogging Spray Tip/Guard Assembly

1. Perform Pressure Relief Procedure, page 10.

2. Reverse spray tip (X) to UNCLOG position.

3. Put prime/spray valve (D) DOWN to spray position.

4. Push spray button (A) to start field marker and clear

clog.

5. Push spray button again to stop field marker.

6. Perform Pressure Relief Procedure, page 10.

7. Rotate spray tip (X) back to SPRAY position.

8. Put prime/spray valve DOWN to spray position.

9. Push prime/spray button to start sprayer and resume

spraying.

10. If spray tip is still clogged, you may have to repeat

steps 1 - 9 several times.

11. If material still fails to be sprayed, perform Pressure

Relief Procedure, page 10.

12. Perform Tip Removal Cleaning, page 19.

13. Perform Filter Removal/Cleaning, page 11.

14. If applicable, perform CleanShot Cleaning, page 19.

Always perform Pressure Relief Procedure before

unclogging spray tip/guard assembly.

ti20183a

ti20192a

ti20184a

ti20212a

ti20191a