User Manual

3 Rear
Facing
43
3. Recline the Car Seat
Pull out the recline handle and place the car
seat in 1st, 2nd or 3rd recline position.
4. Place Car Seat Rear-Facing in Back
Seat of the Vehicle
Place rear-facing in vehicle seat. The base
should sit as flat as possible on the vehicle
seat.
Note: Make Sure Base is a minimum of
80% on Vehicle Seat.
5. Check the Level Indicator
Vehicle MUST be on level ground.
Check the level indicator on the car seat.
The bubble must be completely within
the blue zone.
Adjust the recline until the bubble is
completely within the blue zone.
1. Make Sure the LATCH Strap is in the
Forward-Facing Belt Path Marked
with Orange Label
To move the InRight
TM
LATCH strap, review
section 7.