Installation Guide

9 Vehicle
Information
99
Sliding Latch Plate and ALR Retractor
A latchplate that slides freely on the belt webbing and cannot,
by itself, hold the belt snug around a car seat.
Slowly pull the shoulder belt all the way out. Route the
vehicle seat belt through the proper belt path and buckle it in.
Then, as you pull the vehicle seat belt tight, feed all the slack
back into the retractor.
Grab the sides of the seat at the belt path and slide the seat
side-to-side and front-to-back. The seat should not move
more than 1” (2.5 cm).