Installation Guide

3 Rear

Facing

8. Connect InRight

LATCH Connectors to Vehicle’s

Lower LATCH Anchors

LATCH strap should lay as flat as possible and not be twisted.

9. Tighten the LATCH Strap

Press down firmly on the front of the car seat while tightening

the LATCH strap.

10. Test For Tightness

Grab the sides of the seat where the LATCH strap is routed

and slide the car seat side to side and front to back.

If the seat moves less than 1” (2.5 cm), it is tight enough.

Click!