Installation Guide

7 Moving
LATCH
109
2. Unsnap Bottom Seat Pad to Expose
the LATCH Strap
3. Pull LATCH Connectors Out of the
Belt Path Openings into the Center
of the Car Seat
4. Slide Entire LATCH Strap Along Bar
to the Desired Belt Path Openings
Rear-Facing: Slide LATCH strap along bar
to the front of the seat.
Forward-Facing: Slide the LATCH strap up
along bar to the top.
5. Push the LATCH Connectors Out
Through the Desired Belt Path
Openings on Each Side of Car Seat
Rear-Facing:
Make sure the LATCH
strap is in front of the
buckle strap when the
buckle is in the inner-
most position (A), and
in behind when in the outter-most position (B)
and that it is flat and is not twisted.
Forward-Facing:
Make sure the
LATCH strap is
routed behind the
harness strap, is flat,
and is not twisted.
Rear-
Facing
Forward-
Facing
A B