User Manual

71
7 Moving
LATCH
Harness Covers
Make sure that harness covers do not interfere
with placement of the chest clip at armpit level.
Remove the harness covers when using this
seat forward facing.
To remove, undo the fastening strips and remove.
Headrest Pillow
Slide head pillow into opening in head support
as shown. Curved bottom of head pillow allows
for head pillow to be pulled down to fit smaller
infants.
Body Support
Use only in the rear-facing mode.
Body support must be used if shoulders are
below the lowest harness setting.
Never allow body support to bunch or fold behind
child.
7-A
Moving the LATCH Strap
B
A
1. For Ease of Moving the LATCH Strap
A. Undo Snaps and fastening strips in front
of child restraint.
B. Pull the LATCH straps out of the belt path
opening, so that the LATCH hooks end up
on the same side of the child restraint.