Full Product Manual

Technical Specifications
3A6430C EN 37
Technical Specifications
US Metric
Sprayer
Maximum fluid working pressure
Project Painter Plus 2800 psi 193 bar, 19.3 MPa
X5 or LTS15 and X7 or LTS17 3000 psi 207 bar, 20.7 MPa
Maximum Delivery
Project Painter Plus 0.24 gpm 0.91 lpm
X5 or LTS15 0.27 gpm 1.0 lpm
X7 or LTS17 0.31 gpm 1.2 lpm
Maximum Spray Tip Size
Project Painter Plus, X5, LTS15 0.015 in. 0.38 mm
X7 or LTS17 0.017 in. 0.43 mm
Fluid Outlet npsm 1/4 in. 1/4 in.
Generator Minimum 2500 W
Power Requirements
110–120V, 9 A, 1Ø
Dimensions
Height
Project Painter Plus
13.8 in. 35.1 cm
X5 or LTS15
17.9 in. 45.5 cm
X7 or LTS17
37.0 in. 94.0 cm
Length
Project Painter Plus
13.8 in. 35.1 cm
X5 or LTS15
14.5 in. 36.8 cm
X7 or LTS17
19.3 in, 49.0 cm
Width
Project Painter Plus
12.1 in. 30.7 cm
X5 or LTS15
12.4 in. 31.5 cm
X7 or LTS17
15.3 in. 38.9 cm
Weight
Project Painter Plus
13.2 lb. 5.9 kg
X5 or LTS15
16.5 lb. 7.5 kg
X7 or LTS17
26.5 lb. 12.0 kg
Storage temperature range  –30° to 160°F
–35° to 71°C
Operating temperature range  40° to 115°F
4° to 46°C
Materials of Construction
Wetted materials on all models stainless steel, brass, leather, ultra-high molecular weight
polyethylene (UHMWPE), carbide, nylon, aluminum, PVC,
polypropylene, fluoroelastomer, plated steel
Notes
* Startup pressures and displacement per cycle may vary based on suction condition, discharge
head, air pressure, and fluid type.
 When pump is stored with non-freezing fluid, pump damage will occur if water or latex
paint freezes in pump.
 Damage to plastic parts may result if impact occurs in low temperature conditions.
 Changes in paint viscosity at very low or very high temperatures can affect sprayer
performance.