Operating Guide
Table Of Contents
- Models
- Warnings
- Component Identification
- Preparation
- Setup
- Mixing Material
- Operation
- Shutdown and Cleanup
- Maintenance
- Troubleshooting
- RTX1400si Sprayer
- RTX2000pi Sprayer
- RTX2500pi Sprayer
- Notes
- Compressor Parts
- Flow Switch Assembly
- Gun & Hose
- Wiring Diagrams
- Wiring Diagram
- Technical Specifications
- Graco Standard Warranty
- Graco Information
Technical Specifications
42 3A3258L
Weight (gun)
RTX1400si - 120V
1.4 lb. 0.6 kg
RTX1400si 230V /
RTX2000pi / RTX2500pi
2.3 lb. 1.0 kg
Noise** (dBa) @ max air pressure)
Sound pressure
88.4 dBa
Sound power
102.8 dBa
Storage temperature range
–35° to 160°F –1.6° to 71°C
Operating temperature range
40° to 115°F 4° to 46°C
Materials of Construction
Wetted materials on all models brass, aluminum, plastic, stainless steel, plated carbon
steel, elastomer
Notes
* Startup pressures and displacement per cycle may vary based on suction condition,
discharge head, air pressure, and fluid type.
** Sound pressure measured 3 feet (1 meter) from equipment while spraying.
Sound power measured per ISO-9614.
Pump damage will occur if water-based fluid freezes in pump.
Damage to plastic parts may result if impact occurs in low temperature conditions.
Temperature affects material viscosity, which can affect sprayer performance.
US Metric