Instructions / Assembly

Repair
334599H 9
Repair
Dissemble Pump
1. Remove packing nut and throat
adjustment spacer. Retaining nuts are
not removable and not sold separately.
2. Unscrew cylinder from intake valve.
3. Dissemble intake valve. Clean and
inspect. O-ring may require a pick for
removal.
4. Tap piston rod out of cylinder with a
hammer or flip over and tap piston rod
out against a bench.
ti24863a
Retaining
Nuts
ti24870a
NOTICE
If using a pick to remove the O-ring use care
to avoid damage to the machined surfaces.
ti24874a
ti24875a