Specifications

Test Report
Number: GZHH00390347
Tests Conducted
*GZHJ390347*
Page 5 of 5
Intertek Testing Services Shenzhen Limited, Guangzhou Branch
帿㖕㣔牬餘ꆀ䪮助剪⸉剣ꣳⰖ぀䎛䊜ⴔⰖ぀
#111 TCL Cultural Industry Park, Guangpu-west Road, Science City, High and New Technology Industrial
Development Zone, Guangzhou. / Block E, No.7-2 Caipin Road, Guangzhou Science City, GETDD, Guangzhou.
䎛䊜넞倝䪮助䒓〄⼓猰㷖㙹⯕靶銯騟 69 〿 TCL 俒⻊❡⚌㔩宨⴯瑟ꢂ 111/䎛䊜絑崸䪮助䒓〄⼓猰㷖㙹䕙곸騟 7 〿⛓✳ E 叿(510663)
Tel [phone]
Fax [phone]
intertek.com.cn
intertek.com
5 Total Lead (Pb) Content
As per Standard Operating Procedure for Determining Lead (Pb) in paint and other similar surface coatings,
test method CPSC-CH-E1003-09.1 was used and total Lead content was determined by Inductively Coupled
Argon Plasma Spectrometry.
Result (%)
Tested Component
Element
(1+2)
Reporting
Limit
(%)
Limit
(%)
Lead (Pb) ND 0.001 0.009
The above limit was quoted according to U.S. CFR Title 16 Part 1303 for Ban of Lead-containing Paint and
Certain Consumer Products Bearing Lead-containing Paint.
ND = Not detected (less than reporting limit)
Tested Components: See component list in the last section of this report
************************************************************************************************************************************
Component list：
(1) Coatings (beige, brown) on plastic (surface of binding).
(2) Grey coating on metal (track of drawer).
(3) White plastic excluding coatings (binding).
(4) White plastic (gear of track of drawer).
(5) Dark brown fiberboard (back dam-board).
(6) Brown fiberboard (bottom of drawer).
(7) Brown fiberboard with beige/brown layer (body).
(8) Brown particle board (body).
(9) Silver color metal excluding coating (track of drawer).
(10) Silver color metal (screw on drawer).
(11) Silver color metal (lining screw of drawer).
(12) Silver color metal (pin of backing).
************************************************************************************************************************************
End of report
The statements of conformity reported have considered the decision rule agreed, namely that Intertek have taken account of measurement uncertainty as
calculated by Intertek, and applied according to ILAC-G8/09:2019 (Non-binary acceptance based on guard band w = U) except designation from the customer,
regulation or test specification.
This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any
particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only
accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no
warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the
Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute
or otherwise, except in the event of our gross negligence or wilful misconduct. This report shall not be reproduced unless with prior written approval from Intertek
Testing Services Shenzhen Limited, Guangzhou Branch.