Owner Manual

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
Step
1. Unscrew the screws (M) above the frame (O), align the screw holes of the frame (O) with the tooth holes A, B, C and D of the square
tube (L), and lock them with the screws (M) and the Phillips Screwdriver (N).
2. Unscrew the screws (M) above the frame (K), align the screw holes of the frame (K) with the tooth holes A, B, C and D of the square
tube (L), and lock them with the screws (M) and the Phillips Screwdriver (N).
3. Fix the four square tubes (L) to the hardware arm (K) with screws (M) and tighten with phillips screwdriver (N).
4. Fix the square tubes assembly to the hardware frame (O) with screw (M), and then tighten it with phillips screwdriver (N).
5. Twist the center tube (P) on the fixture body (Q), and then twist the other end of the center tube to arm (K).
6. Twist the L12" tube (J) and L6" tube (I) to the hardware arm (K) in turn.
7. Twist the canopy (G) to the L6" tube (I).
8. Lock the mounting plate (B) to the junction box on the ceiling with mounting screws (D).
9. Connect the positive and negative ends of the power cord on the lamp to the positive and negative ends of the power cord in the
home junction box correctly with wire connector (A).
10. Lock the canopy (G) to the fixture screws (C) with the finial (H).
11. Lock the bulb (R) to the socket.
Connect, Hot, Black or Red Outlet Supply Wire to: Connect, Neutral, White Outlet Supply Wire to:
Black White
* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot
wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(E) on mounting bracket, no less
than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire
connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting
bracket. Tighten ground screw.
PLEASE USE TYPE"B" BULB MAX 40-WATT OR LED BULB MAX 9-WATT, THERE ARE 5PCS LED 4-WATT
BULB IN THE BOX.
ENJOY YOUR LAMP
2/2