Assembly Instructions

Step 3
Step 4
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Stand the Chair up.
Place the Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit into to the Chair.
This will help to align all parts at all joints.
Then get off the Chair, and in a sequential manner, proceed to tighten all Screws and
Bolts.
When tightening the Screws and Bolts, tighten sequentially.
DO NOT tighten any Screw and Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and Screws and execute this same
process.
If the Chair is not stable it could lead to damage to the product.
Page 5 OF 6