Assembly Instructions

Assembly
Instructions
O3.
Side Part
1 pc. .
O5.
Base Part
1 pc.
O2.
Back Part
1 pc. .
O2
O2
O5
O5
O3
O4
O4
O4
O3
O3
O1
O1
O1
Assemble the Pull Handle
with Machine Screw on
the Front Part (O1).
(See the figure 4)
(Figure 1)
(Figure 2)
(Figure 3)
(Figure 4)
HARDWARE LIST
Pull Handle
1 pcs.
Machine Screw
for Pull Handle
2 pcs.
Wood Screw (short)
for base part
6 pcs.(+1 extra)
Wood Screw (long)
for side part
8 pcs.(+1 extra)
Insert the remaining (6) 1/2 screws
into the pre-drilled holes on Base Part
(O5), then tighten all screws
(See the figure 3)
”
make sure roller
is on the back
O1.
Front Part
1 pc.
Slide the Plywood Base Part (O5) into
the grooves on Side Parts (O3) and (O4).
Be sure to push the plywood all the way
forward so it meets the Front Part (O1).
(See the figure 2)
Unfinished Side
O4.
Side Part
1 pc.
O1
UNIT PART LIST
Using a , insert 1”
screws into the pre-drilled holes as shown,
tighten half way. (See the figure 1)
phillips screwdriver
Drawer (O)