Assembly Instructions

Assembly Instructions 2/4

STEP 1

STEP 2

STEP 3

Attach four Casters

underneath Base (L)

with Wood Screws.

(See ‘Arrow’ sticker

indicating front side)

Assemble Front Piece (H1),

(H2) and Front Rail (K).

(See figure 1)

Attach

the

side of unit with Head Cap Bolts.

the assembled unit

to Middle Panel (D) and (E).

Attach Side Panel (B) to

Attach the Back Piece (G), Middle Panel (D)

and Back Piece (G), Middle Panel (E) onto the

Base (L).

Wood Screw

Head Cap Bolt

Locking Caster

(On Front)

(Figure 1)

IMPORTANT

* Do not tighten up all the bolts until each part is properly assembled.

* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.

* Use a soft cloth between these parts and the floor.