Assembly Instructions

ManualsBrandsGracie Oaks ManualsFurnitureAadham 52.5'' Solid Wood Kitchen Cart with Locking Wheels

Solid Wood Top Kitchen Cart

with Wood Breakfast Bar

PART LIST

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

HARDWARE LIST

Hex Wrench

1 pc.

Pull Handle

2 pcs.

Machine Screw

for Pull Handle

4 pcs.

Wood Screw

for Caster and

Gate Leg

22 pcs. (+2 extra)

Wood Plug

10 pcs.

(+2 extra)

Side Panel

1 pc.

Top

1 pc.

Side Panel

1 pc.

Back Panel

3 pcs.

Back Piece

2 pcs.

H2.

Front Piece

1 pc.

H1.

Front Piece

1 pc.

Back Stretcher

1 pc.

Front Stretcher

1 pc.

Front Rail

3 pcs.

Base

1 pc.

Shelf

2 pcs.

Side Rack

1 pc.

Gate Leg

1 pc.

Side Rack

1 pc.

Brush Chrome Pipes

3 pcs.

Middle

Panel

1 pc.

Middle

Panel

1 pc.

Base Rack

1 pc.

(For Drawer N&O packed in separate

carton with hardware and assembly

instructions.)

Caster

two lock

two non-lock

4 pcs.

Door

1 pc.

Door

1 pc.

KD. Drawer

1 pc.

KD. Drawer

3 pcs.

Head Cap Bolt

14 pcs. (+1 extra)

Adjustable Pin

8 pcs. (+2 extra)

Handle Arm

2 pcs.

Round Arm

1 pc.

Cam Lock

4 pcs.(+1 extra)

Cam Lock Screw

4 pcs.(+1 extra)

Tools required for assembly : Phillips screwdriver

Small

Hex Wrench

1 pc.

Summary of content (6 pages)

PAGE 1
Solid Wood Top Kitchen Cart with Wood Breakfast Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST A. Top 1 pc. D. Middle Panel 1 pc. B. Side Panel 1 pc. C. Side Panel 1 pc. E. Middle Panel 1 pc.
PAGE 2
Assembly Instructions 2/4 IMPORTANT Wood Screw * Do not tighten up all the bolts until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor. Wood Screw L STEP 1 Attach four Casters underneath Base (L) with Wood Screws.
PAGE 3
Assembly Instructions 3/4 STEP 4 Head Cap Bolt I Slide Back Panel (F) into place. F Attach Back and Front Stretcher (I), (J) to the unit with Head Cap Bolts. F F J Attach Side Panel (C) to the other side of unit with Head Cap Bolts. C Head Cap Bolt Q S STEP 5 Attach Side Rack (Q) to Side Panel (B) with Head Cap Bolts. T R Attach Brush Chrome Pipes (T) and Base Rack (S) to the Side Rack (Q). B Attach Side Rack (R) to the Side Panel (B), using Head Cap Bolts.
PAGE 4
Assembly Instructions 4/4 STEP 8 Cam Lock Screw Turn over Top (A) and put Cam Lock Screws into the pre-drilled holes. Tighten up Cam Lock Screws. A STEP 9 A Place Top (A) onto the unit. Cam Lock D Put Cam Locks into the holes of the Side Panel (B) and (C) and tighten all Cam Locks as to secure the top with the body. E B Insert Adjustable Pins into the side panels at the desired level. C P Place Shelf (P). P STEP 10 Attach Pull Handles to the Door (W) and (X) using Machine Screws.
PAGE 5
Drawer (N) HARDWARE LIST UNIT PART LIST N1. Front Part 1 pc. for each N3. drawer. Side Part 1 pc. for each drawer. N2. Back Part 1 pc. for each drawer. Pull Handle 3 pcs. N4. Side Part 1 pc. for each drawer. N5. Base Part 1 pc. for each drawer. Wood Screw (short) for base part 18 pcs.(+1 extra) Wood Screw (long) for side part 24 pcs.(+1 extra) Machine Screw for Pull Handle 6 pcs.
PAGE 6
Drawer (O) HARDWARE LIST UNIT PART LIST O1. Front Part 1 pc. Pull Handle 1 pcs. O4. Side Part 1 pc. O3. Side Part 1 pc. . O5. Base Part 1 pc. O2. Back Part 1 pc. . Wood Screw (short) for base part 6 pcs.(+1 extra) Wood Screw (long) for side part 8 pcs.(+1 extra) Machine Screw for Pull Handle 2 pcs. Assembly Instructions Using a phillips screwdriver, insert 1” screws into the pre-drilled holes as shown, tighten half way.