Owner Manual

Note: The model number is printed on a label which can be found on

the inside door, back or side of the base assembly.

Assembly Tips:

1. Select an area where you will assemble this product. To

protect components, choose a smooth surface that’s free of

cracks or openings.

2. Spread out all parts.

3. Tighten all hardware connections by hand first. Then, before

completing each step, go back and fully tighten all hardware.

Be careful not to over-tighten. That could damage surfaces or

strip threads.

4. For best results, complete each step in the order presented.

To complete assembly you will need:

• (1) Leak detection solution (instructions on how to make the

solution are included in the “Operating Instructions” section of

this manual).

• (1) Precision-filled LP gas grill tank with Acme Type 1 external

threaded valve connection (standard grill size) (not included).

Typical assembly is approximately one hour.

W CAUTION: Two (2) people will be required for

assembly.

Assembly Instructions

Attach Side and Rear Panels

Note: Attach bottom screws before attaching top screws. Do not fully tighten screws

until step 4.

x 12

Attach Legs

Note: Do not fully tighten screws until step 4.

x 4

Attach Base

Note: Tighten all screws from steps 2-4.

x 4