Assembly Instructions

Step 4
Step 5
Turn the Table right side up.
Place the Table on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, place a force onto the table top.
This would help to align all the parts at all the joint areas.
Then proceed to tighten all bolts sequentially.
DO NOT tighten any screw fully and then towards the next one.
This would cause the frame to warp.
If there is still wobbles, loosen the screws and execute this same process.
WARNING!! IF THE TABLE IS NOT STABLE , IT COULD LEAD TO DAMAGING THE
PRODUCT.
Ensure all bolts are fully locked into position.
The table is ready to be used.
This Table can only be used on a flat, level surface.
Secure Legs to Table by using Bolts (①) and Washers (②) with Allen key (③) as shown in
picture above.
Do not fully tighten the bolts.
3
2
1
2
1
Page 6 of 7