Assembly Instructions

PAGE 1 OF 2

TABLE PARTS:

Wrench

JCBB Bolt

Allen Key

1 pc

Lock Washer

12pcs12 pcs

Flat Washer

4 pcs

NOTE:

THE UNIT SHOULD BE ASSEMBLED BY 2 OR MORE PEOPLE.

STEP 1

STEP 2

Hex Nut

8 pcs

Table Top

Pedestal Leg

4pcs

Pedestal stand

Mounting plate

1pc

Pedestal Stand

Turn the pedestal upside down. Attach legs by inserting

hanger bolts through pre-drilled holes on pedestal.

Put a Flat Washers, Lock Washers and Hex Nut onto

the hanger bolts then tighten with the provided Wrench.

Hex Nut

Lock Washer

Flat Washer

Wrench

Pedestal Leg

Level Glide

Lock Washer

Flat Washer

Allen Key

JCBB Bolt

Position the table top upside down on a smooth, protective

surface such as carpet.Attach Mounting Plate as shown. Secure

with Flat Washers, Lock Washers andJCBB Bolt, then tighten

all JCBB Bolts with Allen Key provided.

DROP LEAF PEDESTAL TABLE TOP & BASE

HARDWARE PART:

PAGE 1
HARDWARE PART: Hex Nut 8 pcs DROP LEAF PEDESTAL TABLE TOP & BASE Lock Washer Flat Washer Wrench 12 pcs 12pcs 1 pc Allen Key 1 pc JCBB Bolt 4 pcs TABLE PARTS: Table Top 1pc Pedestal Leg 4pcs Pedestal stand 1pc Mounting plate 1pc NOTE: THE UNIT SHOULD BE ASSEMBLED BY 2 OR MORE PEOPLE. STEP 1 Turn the pedestal upside down. Attach legs by inserting hanger bolts through pre-drilled holes on pedestal.
PAGE 2
STEP 3 DROP LEAF PEDESTAL TABLE TOP & BASE Align and attach the table top to the pedestal. Insert a Flat Washers, Lock Washers and Hex Nuts onto the hanger bolts. Tighten all Hex Nuts with the provided Wrench.