Installation & Assembly
C
C
D
D
B
B
Attach the 1st Legs (B) to the 3rd Legs (D) and 2nd Legs (C) using Bolts (①) with
Washers (②) and Allen Key (④), as show in picture above.
Do not fully tighten the Bolts.
4
1
2
Step 9
Step 10
With assistance from your adult parners, Turn the Table right side up.
Inspect it and make sure all parts are adequately connected.
Check to ensure there is NO WOBBLINESS.
In a sequential manner, ensure all bolts and screws are fully locked into position and
secured.
CAUTION: When tightening these screws and bolts, tighten sequentially.
DO NOT tighten any screw and bolt fully and then towards the next one. This would
cause the frame to warp.
If there is still wobbles, loosen the screws and bolt and execute this same drop tests.
WARNING !! IF TABLE IS NOT STABLE, IT COULD LEAD TO DAMAGING THE
PRODUCT.
Ensure all screws and bolts are fully locked into position.
The Table is ready to be used.
Caution: This Table can only be used on flat, level surface.










