Installation & Assembly

Assembly Instructions 2/3
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Key Wrench and Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Panel (B) to Pedestal (C)
with Flat Washers (large),
Spring Washers (large) and Nuts.
(See Figure 1)
Nut
Spring Washer (large)
Flat Washer (large)
Figure 1
Figure 2
B
C
Nut
Spring Washer (large)
Flat Washer (large)
1” thick foam
from carton
D
D
D
D
STEP 2
Place unit upside down on
1” thick foam from carton.
Attach Legs (D) to unit
with Flat Washers (large),
Spring Washers (large) and Nuts.
(See Figure 2)