Installation & Assembly (Table)

CAUTION: You must read this before you proceed.

CAUTION : This Table is NOT a TOY.

Keep your child / children at bay in the process of assembly.

For turning the Table and to prevent damage to the Table, 02 persons

may be needed to execute this action.

Table

Please look in the

Table Top

for hardware packs and legs.

1 of 5

PAGE 1
CAUTION: You must read this before you proceed. Please look in the Table Top for hardware packs and legs. Table CAUTION : This Table is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Table and to prevent damage to the Table, 02 persons may be needed to execute this action.
PAGE 2
Description Qty A Table Top 1 B Legs 4 Description Qty ① Bolt (M6 x 55mm) 9 ② Flat Washer (M6xD1.5mmm) 9 ③ Allen Key 1 No. No.
PAGE 3
Legs (B) TABLE TOP (A) Legs (B) Legs (B) Legs (B) This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 Place the Table Top (A) with its underside skywards onto a clean, soft surface to avoid any scratch or damage to the product. Affix loosely the Legs (B), 2nd into the mounting position at the corners of the Table Top (A), using the Bolts (①) with Flat Washers (②), with the Allen Key(③), as shown above. Repeat the same process with the other Leg (B). CAUTION: When tightening these screws, tighten sequentially. DO NOT tighten any screw fully and then towards the next one.
PAGE 5
of 5