Installation & Assembly (Chair)

Inspect the Chair and make sure all parts are adequately connected.
Carefully sit onto the Chair. This pressure will help align all parts at all joints.
In a sequential manner, tighten all Bolts and Screws at all joints.
Adjust the Levellers until the Chair is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean and hold
the Chair while you are working.
Step 4
Attach Seat Panel(D) to the Chair using Screws(②) and Allen Key(③).
Note: Insert Screws(②) from inside to outside of Seat Panel(D).
Do not fully tighten the Screws.
Step 5
Adjust Pre-installed Levellers
height for balance
5 of 6